Shcompapi.dll not found
Hello, I’m looking for a vnc for a WinCE2013 computer. I previously had a computer with WinCe 6 and used Efon vnc succesfully. I tried with your new Efonvnc for CE 8 Toradex Documents - EfonNVC...
View ArticleProvisioning Device
HI, I am running into an issue where I can get the device to complete the initial provisioning, but then the device fails to communicate with the server. Starting from the beginning, I had to copy the...
View ArticleNeed Help Flashing Python-Compatible Yocto Image on Colibri i.MX6ULL with...
Hello, I’m currently working with a Colibri i.MX6ULL module mounted on an Aster Carrier Board, and I need to flash a Yocto-based image that is configured to support Python. I’m looking for advice or a...
View ArticleSpi in toradex colibri evaluation board IMX7
Hi team I just want to communicate via spi with toradex board and stm32 board just now communicated with stm32 with stm32 but now i am expecting to communicate with toradex where toradex as a master...
View ArticleApalis iMX8QM u-boot GPIO initial setting
dear all, i’m working with the following configuration: Apalis iMX8QM 4GB WB IT V1.1D Ixora Carrier Board V 1.2A Linux BSP 6.3.0 I want to change GPIO settings in u-boot mode. I want to set GPIO6_10 ~...
View ArticlePlugging the LVDS Toradex screen
Hi, i’m very very news to toradex and i’m having a problem with the first launch of my bord. Hardware I’am using : Dahlia V1.1D Verdin IMX8MP Verdin DSI to LVDS adapter 1.1 Toradex Capacitive Touch...
View ArticleTorizon Core Builder deploy permanent data to EasyInstaller Image
Hello everyone, If some customizations need to be added in a TorizonCoreBuilder project, Example: To add an M4 binary, the U-Boot variables should be edited to automatically load this binary, run this...
View ArticleTorizonCore deploys wrong checksum for custom image build
Issue: The checksum when using Torizoncore tool to deploy to a target, is different than the checksum from a successful Torizoncore build command. How do I ensure the custom image that I built is...
View ArticleColibri IMX7 not booting after loading RPMsg Kernel Module custom image
Issue: When deploying a BSP 5 based custom image to the Colibri IMX7 using the Torizoncore CLI tool, the target is unable to boot the Arm-A core with the new image as outlined below: Background: I am...
View ArticleI changed the password on my board, and tried to run torizoncore-builder...
I get this error: torizoncore-builder isolate: error: argument --remote-password: expected one argument I am not posting my pw here, but it is a valid pw, and I have logged into the board using it. I...
View ArticleHow to flash several AM62 at same time
Hello Teams Toradex. I would like to know if an industrial programming solution exists to flash several AM 62 cards at the same time. Currently I use the Toradex easy installer, but this does not...
View ArticleFlashing buildroot image on Verdin iMX8MP
Hi! I am trying to get buildroot working on Verdin iMX8MP SoM. I have the Yavia development board and non wifi version of SoM. I followed the Building Linux Kernel article and Building UBoot article...
View ArticleHow to load BSP build output IPL and QNX IFS without external device like SD...
Hi Toradex Team, After building Apalis imx8qm BSP for QNX in Linux environment we are getting IPL and QNX IFS file. Based on BSP user guide - “SDP71_BSP_UG_Toradex_Apalis_iMX8QM_20230821.pdf” we need...
View ArticleAccessing EEPROM 24C02 using C#/.NET
Hi, I send you this message because, I am making a POC for a project , using a Verdin i.MX 8M Plus and the Dahlia board, with a 10’’ capacitive touchscreen. Here is my config....
View ArticleEMI EMC issue - To Toradex - Apalis iMX8QM
We have been using Toradex Apalis module having i.mx8qm processor from NXP. Our product is an Infotainment system targeted to be placed in truck for North America region. We have connected LVDS...
View ArticleHow to Store Docker Data on an External Storage Device here: SSD
Hello everyone, We would like to move the docker directory to an SSD. There is a guide that doesn’t work for me. See here I partitioned a 256 GB SSD into 2 parts and named the first partition...
View ArticleUnable to boot Aplais iMX8
I was trying to enable secondary boot on our Apalis iMX8 board. I used the u-boot partconf command to modify the partion configuration. / # mmc extcsd read /dev/mmcblk0boot0 | grep PARTITION Partition...
View ArticleNo data partition mount with kirkstone 6.6.0
I have upgraded my yocto project from dunfell 5.7.3 to kirkstone 6.6.0 and apparently the data partition mmcblk2p4 is not mounted anymore to /data. Selected MACHINE is colibri-imx7-emmc. The project I...
View ArticleIMX8MP Verdin PCIE_W_DISABLEn function
Hello, On the IMX8MP Verdin module, pin 92, aka MSP_3/PCIE_W_DISABLEn seems to be for disabling the wireless interface, the pinout designer calls it Wi-Fi Wireless Disable - however, grounding this...
View ArticleDifference between T20 BSP2.4b2 and BSP2.4
Hello, what is the difference between T20 WinCE BSP2.4b2 and BSP2.4? Here I find only the changelog of BSP2.4b2: developer-archives.toradex.com Windows Embedded Compact - T20 / T30 BSP Release Known...
View ArticleHow to communicate with M4 on the Verdin AM62 through ttyRPMSG
Hello Toradex Community, first: here is our setup: Software summary ------------------------------------------------------------ Bootloader: U-Boot Kernel version: 6.1.46-6.5.0+git.8e6a2ddd4fe6...
View ArticleBluetooth HFP echo on receiver side
When making a bluetooth hands free phone call, the person on the receiving end of the call hears an echo (or loopback) of their own voice with an aprox 1 second delay. The feedback IS NOT caused by a...
View ArticleToradex Easy Installer: Set GPT Partition Label During Creation
It would be extremely useful to be able to set GPT Partition Labels during GPT creation in Toradex Easy Installer, specified through the image.json of the image. The primary use-case for this is...
View ArticleGstreamer Missing "tensor_converter" Element
Hi, I built a new linux image with machine learning software following this article. I am trying to run a object detection GStreamer pipleline example outlined in Session 8.1 of this user guide and...
View ArticleUnable to download kernel source code from git repository
Hi, we are trying to make custom kernel and following the below link developer.toradex.com Build Linux Kernel from Source Code | Toradex Developer Center Master Linux kernel building for Toradex...
View ArticleHow to list the correct output interface of an Colibri EVAL board
I’m attaching a “Resistive Touch Display 7” on connector X34. How can a determine the correct interface name for use in weston.ini file in the output ? 2 posts - 2 participants Read full topic
View ArticleiMX7D & LCD interfacing is not working
Hello I have probem to get working LCD interface with LCD Display(1280x800) using BSP 6.1.76(kirkstone Yocto). I worked in u-boot, device tree and device tree overlays to bring up the LCD. device-tree...
View ArticleStrange behaviour when using torizon-builder and adding overlays
Hello Toradex Team, I’m using imx8mm with dahlia board, DSI display with DSI-DSI adaptor and 5.15.148-6.6.0-devel+git.23a8e831749d The problem was, when I was creating an image with torizon builder, I...
View ArticleNVIDIA L4T R16 on Colibri T30 Errors
Hi! I’m facing a similar issue than this post, but the proposed fixes doesn’t fix my problem. After flashing my device with NVIDIA’s rootfs, my device prints the following message several time and I...
View ArticleIs there a URL I can go to, to see the versions of packages (libraries) that...
We need to list all the versions of libraries that are being used in the build of TorizonOS for our records. Is there a place I can go to get this information? Thanks, Steve 1 post - 1 participant...
View Article
More Pages to Explore .....